A small problem
- JIMMYS
- Berichten: 272
- Lid geworden op: 02 jul 2013, 21:32
- Locatie: Greece
- Gegeven waarderingen: 56 keren
- Ontvangen waarderingen: 3 keren
A small problem
Hello to all of u,
maybe this is not the right place to post but forgive me, i dont speak your language.
I am from Greece, the country who passes a lot of problems but also a country with a lot of beatys(the best beaches in the world) which last for ever!
So, i have a Kreidler florett tm 1968(photos another time) and i have also a problem.
i cant understand how i can put this...
i cant see what the marks means!
Help me!
http://img842.imageshack.us/img842/7292/q3h6.jpg
maybe this is not the right place to post but forgive me, i dont speak your language.
I am from Greece, the country who passes a lot of problems but also a country with a lot of beatys(the best beaches in the world) which last for ever!
So, i have a Kreidler florett tm 1968(photos another time) and i have also a problem.
i cant understand how i can put this...
i cant see what the marks means!
Help me!
http://img842.imageshack.us/img842/7292/q3h6.jpg
- Enzo-tvdzijden
- Expert
- Berichten: 60385
- Lid geworden op: 27 nov 2002, 21:55
- Locatie: Gem. Leidschendam/Voorburg
- Gegeven waarderingen: 964 keren
- Ontvangen waarderingen: 2278 keren
Re: A small problem
Your picture is to old for this model. But the technique is good.
To look ad my picture he first two White arrows is the marking of the point that your contact get open. Make sure that the open gate is 0.35 mm. When the centerpoint in the second position that is the BDP (red arrow)
That is only when you have the right original parts on your ignition.
To look ad my picture he first two White arrows is the marking of the point that your contact get open. Make sure that the open gate is 0.35 mm. When the centerpoint in the second position that is the BDP (red arrow)
That is only when you have the right original parts on your ignition.
- Bijlagen
-
- 27.jpg (76.85 KiB) 20875 keer bekeken
- JIMMYS
- Berichten: 272
- Lid geworden op: 02 jul 2013, 21:32
- Locatie: Greece
- Gegeven waarderingen: 56 keren
- Ontvangen waarderingen: 3 keren
Re: A small problem
Yes, but with the picture u see my problem and my model is too slose to the picture.Enzo-tvdzijden schreef:Your picture is to old for this modell.
Anyway, my question is how i can put it back again, what the marks means and how i can synchronize it.
Yes the staff is Original.
- Enzo-tvdzijden
- Expert
- Berichten: 60385
- Lid geworden op: 27 nov 2002, 21:55
- Locatie: Gem. Leidschendam/Voorburg
- Gegeven waarderingen: 964 keren
- Ontvangen waarderingen: 2278 keren
Re: A small problem
Measuring with toolsJIMMYS schreef:Yes, but with the picture u see my problem and my model is too slose to the picture.Enzo-tvdzijden schreef:Your picture is to old for this modell.
Anyway, my question is how i can put it back again, what the marks means and how i can synchronize it.
Yes the staff is Original.
viewtopic.php?t=1604
And
viewtopic.php?t=1603
cheap eone http://www.kreidlerparts.com/parts/09.3 ... ht-op-tijd.
Better one
- Bijlagen
-
- DSCN7506 (Small).JPG (56.97 KiB) 20841 keer bekeken
Laatst gewijzigd door Enzo-tvdzijden op 06 jul 2013, 14:45, 1 keer totaal gewijzigd.
- JIMMYS
- Berichten: 272
- Lid geworden op: 02 jul 2013, 21:32
- Locatie: Greece
- Gegeven waarderingen: 56 keren
- Ontvangen waarderingen: 3 keren
Re: A small problem
I dont have this staff to do the measurements.
At the white arrows there is the highest gap of the breaker 0.4mm and the position of piston is..?
And i dont understand the red arrow!
I am sorry i am not a profesional guy.
At the white arrows there is the highest gap of the breaker 0.4mm and the position of piston is..?
And i dont understand the red arrow!
I am sorry i am not a profesional guy.
- Enzo-tvdzijden
- Expert
- Berichten: 60385
- Lid geworden op: 27 nov 2002, 21:55
- Locatie: Gem. Leidschendam/Voorburg
- Gegeven waarderingen: 964 keren
- Ontvangen waarderingen: 2278 keren
Re: A small problem
White is the pre ignition. The contact is tight to open.JIMMYS schreef:I dont have this staff to do the measurements.
At the white arrows there is the highest gap of the breaker 0.4mm and the position of piston is..?
And i dont understand the red arrow!
I am sorry i am not a profesional guy.
Red is the piston in the far standing en going back. Between white and red the contact is going to 0.35 mm.
- jvr
- Berichten: 3922
- Lid geworden op: 05 okt 2005, 17:50
- Gegeven waarderingen: 12 keren
- Ontvangen waarderingen: 15 keren
Re: A small problem
Laat hem ff lekker nederlands studeren, begrijpt de gewone mens ook nog wat. Dat domme engelse gelul
doet ie maar in zijn eigen land. DERRR !!! Wij wonen in Nederland en daar praten we ook Nederlands.
doet ie maar in zijn eigen land. DERRR !!! Wij wonen in Nederland en daar praten we ook Nederlands.
- JIMMYS
- Berichten: 272
- Lid geworden op: 02 jul 2013, 21:32
- Locatie: Greece
- Gegeven waarderingen: 56 keren
- Ontvangen waarderingen: 3 keren
Re: A small problem
je een groot probleem Hane. je bent geen gewone mensen. Dit forum is voor mensen die Kreidler houdt en niets meer! en hier is GRIEKENLAND!!!!!!!!jvr schreef:Laat hem ff lekker nederlands studeren, begrijpt de gewone mens ook nog wat. Dat domme engelse gelul
doet ie maar in zijn eigen land. DERRR !!! Wij wonen in Nederland en daar praten we ook Nederlands.
ik ben niet van plan om opnieuw te schrijven in dit forum. dank de man die me helpen!
- Enzo-tvdzijden
- Expert
- Berichten: 60385
- Lid geworden op: 27 nov 2002, 21:55
- Locatie: Gem. Leidschendam/Voorburg
- Gegeven waarderingen: 964 keren
- Ontvangen waarderingen: 2278 keren
Re: A small problem
Jvr is a mad men en drinking sometimes to much beerJIMMYS schreef:je een groot probleem Hane. je bent geen gewone mensen. Dit forum is voor mensen die Kreidler houdt en niets meer! en hier is GRIEKENLAND!!!!!!!!jvr schreef:Laat hem ff lekker nederlands studeren, begrijpt de gewone mens ook nog wat. Dat domme engelse gelul
doet ie maar in zijn eigen land. DERRR !!! Wij wonen in Nederland en daar praten we ook Nederlands.
ik ben niet van plan om opnieuw te schrijven in dit forum. dank de man die me helpen!
-
- Berichten: 6985
- Lid geworden op: 08 sep 2002, 01:57
- Locatie: alhier
- Gegeven waarderingen: 0
- Ontvangen waarderingen: 108 keren
Re: A small problem
You are welcome in this forum. Most people will understand the english language, even those who can barely write in dutch. Just ignore them.
- hermanngas
- Berichten: 4103
- Lid geworden op: 08 jan 2010, 17:08
- Locatie: Dronten
- Gegeven waarderingen: 227 keren
- Ontvangen waarderingen: 229 keren
- JIMMYS
- Berichten: 272
- Lid geworden op: 02 jul 2013, 21:32
- Locatie: Greece
- Gegeven waarderingen: 56 keren
- Ontvangen waarderingen: 3 keren
Re: A small problem
Can anybody help me for the colour of my florett TM 1968
http://imageshack.us/photo/my-images/818/brjf.jpg/
http://imageshack.us/a/img818/7176/brjf.jpg
I think it is not rotorange Ral 2011
maybe is the volkanrot?
some parts are recoloured again.
http://imageshack.us/photo/my-images/818/brjf.jpg/
http://imageshack.us/a/img818/7176/brjf.jpg
I think it is not rotorange Ral 2011
maybe is the volkanrot?
some parts are recoloured again.
- kilometerfresser
- Berichten: 253
- Lid geworden op: 07 nov 2011, 22:42
- Locatie: Bad Honnef (D)
- Gegeven waarderingen: 7 keren
- Ontvangen waarderingen: 20 keren
Re: A small problem
It is Vulkanrot. See http://kreidler-museum.de/1969tm.htm and
http://kreidler-museum.de/farbe.htm
Gr.
Bernd
http://kreidler-museum.de/farbe.htm
Gr.
Bernd
- JIMMYS
- Berichten: 272
- Lid geworden op: 02 jul 2013, 21:32
- Locatie: Greece
- Gegeven waarderingen: 56 keren
- Ontvangen waarderingen: 3 keren
Re: A small problem
Thank u a lot!!!kilometerfresser schreef:It is Vulkanrot. See http://kreidler-museum.de/1969tm.htm and
http://kreidler-museum.de/farbe.htm
Gr.
Bernd
I couldn't find it
- JIMMYS
- Berichten: 272
- Lid geworden op: 02 jul 2013, 21:32
- Locatie: Greece
- Gegeven waarderingen: 56 keren
- Ontvangen waarderingen: 3 keren
Re: A small problem
So, my Kreidler:
http://imageshack.us/photo/my-images/109/dfym.jpg/
http://imageshack.us/photo/my-images/11/09yc.jpg/
What's your opinion?(Wat is uw mening?)
http://imageshack.us/photo/my-images/109/dfym.jpg/
http://imageshack.us/photo/my-images/11/09yc.jpg/
What's your opinion?(Wat is uw mening?)
- Henk 3bakvoet
- Winnaar Kreidlerverkiezing Lexmond 2005
- Berichten: 10817
- Lid geworden op: 27 jan 2005, 01:01
- Locatie: Koog aan de Zaan
- Gegeven waarderingen: 189 keren
- Ontvangen waarderingen: 572 keren
- JIMMYS
- Berichten: 272
- Lid geworden op: 02 jul 2013, 21:32
- Locatie: Greece
- Gegeven waarderingen: 56 keren
- Ontvangen waarderingen: 3 keren
Re: A small problem
Υes, u are absolutely right about the saddle.Henk 3bakvoet schreef:The only real one
See if you can find another saddle.
I 'll look to find one.
Thank u for your comment!
dank u
http://imageshack.us/photo/my-images/580/2mr1.jpg/
- Caspar
- Berichten: 13629
- Lid geworden op: 10 sep 2002, 14:43
- Locatie: Zuid-Oost Limburg
- Gegeven waarderingen: 589 keren
- Ontvangen waarderingen: 822 keren
Re: A small problem
Nice bike.
Please adjust the foot-brake pedal downwards. That is much safer.
You can loosen the M6 nut of the brakelight-switch , then move the switch to the right to get the pedal flat/horizontal.
There is missing one part of the chain cover , new ones are availeble again. also in your colour.
When there is some money left: The right sadle and rear-view mirror makes you bike complete.
Please adjust the foot-brake pedal downwards. That is much safer.
You can loosen the M6 nut of the brakelight-switch , then move the switch to the right to get the pedal flat/horizontal.
There is missing one part of the chain cover , new ones are availeble again. also in your colour.
When there is some money left: The right sadle and rear-view mirror makes you bike complete.
- JIMMYS
- Berichten: 272
- Lid geworden op: 02 jul 2013, 21:32
- Locatie: Greece
- Gegeven waarderingen: 56 keren
- Ontvangen waarderingen: 3 keren
Re: A small problem
It seems that u have a lot of experience!Caspar schreef:Nice bike.
Please adjust the foot-brake pedal downwards. That is much safer.
You can loosen the M6 nut of the brakelight-switch , then move the switch to the right to get the pedal flat/horizontal.
There is missing one part of the chain cover , new ones are availeble again. also in your colour.
When there is some money left: The right sadle and rear-view mirror makes you bike complete.
Your advice about the brake is very usefull.
I 'll take care of it.
Unfortunately the saddle i cant find ti here in Greece and also i cant find the sticks for my Florett.
Thank u man!
- JIMMYS
- Berichten: 272
- Lid geworden op: 02 jul 2013, 21:32
- Locatie: Greece
- Gegeven waarderingen: 56 keren
- Ontvangen waarderingen: 3 keren
Re: A small problem
Τell me my friend,Caspar schreef:A lot of Kreidler part dealers in Holland will ship the parts to you worldwide , no problem
how many terns (cyrcles) to the air adjustment screwdrive of the carburator is the best for the moto to work fine?
- JIMMYS
- Berichten: 272
- Lid geworden op: 02 jul 2013, 21:32
- Locatie: Greece
- Gegeven waarderingen: 56 keren
- Ontvangen waarderingen: 3 keren
Re: A small problem
Be well man, i am gona try it.Arny schreef:0,5 to 2 turns from closed position is the norm.
On average its 1 to 1,5 turns.
You just have to experiment.
Dank u, it is nice people to help each other!