A small problem

Adressen Kreidlers & onderdelen, Verzekeringen, Motorkeuring, Framenummers,
Aankooptips, Links etc.
Plaats reactie
Bericht
Auteur
Gebruikersavatar
JIMMYS
Berichten: 211
Lid geworden op: 02 jul 2013, 21:32
Locatie: Greece

Re: A small problem

#226 Bericht door JIMMYS » 15 jun 2015, 23:27

Getting better today.
Bijlagen
20150615_230906.jpg
20150615_230906.jpg (126.85 KiB) 6974 keer bekeken

Gebruikersavatar
nozems
Berichten: 9342
Lid geworden op: 04 sep 2003, 22:10
Locatie: het emperisch centrum der RS,en

Re: A small problem

#227 Bericht door nozems » 16 jun 2015, 09:41

looks realy nice! Good job :) how is the ride?

Gebruikersavatar
JIMMYS
Berichten: 211
Lid geworden op: 02 jul 2013, 21:32
Locatie: Greece

Re: A small problem

#228 Bericht door JIMMYS » 16 jun 2015, 14:46

nozems schreef:looks realy nice! Good job :) how is the ride?
the ride compare to TM is not better.
the 4 gears are not so short(as theTM) and u have to push up all the gears to keep the revs high.
to see what i mean: the TM with 30km/h and with the fourth keeps runnig
the eitank u have to push up to 40 (and more) to put the fourth gear.
i did not push it to the limits so i dont know the top speed.
the back break is very good.the frond i did not tight it very much because i am afraid to get stucked.( it was stucked when i took it. ad the spring is missing.)
i change the clutch disks the gears have very good feeling.
it is getting started with only 1/4 of the kickstart.
the front suspesion is just good. i change the back one.
the ride i took it was very small as 500meters so to the next bigger ride see u.
the carburator is smaller:1/15
the bougie is:BP6HS

Gebruikersavatar
JIMMYS
Berichten: 211
Lid geworden op: 02 jul 2013, 21:32
Locatie: Greece

Re: A small problem

#229 Bericht door JIMMYS » 16 jun 2015, 23:10

I finished. Not at all but good enough.
Some times the result satisfies me and some other times it does not.
there are 2 or 3 things to do and they will be done.. soon.
Bijlagen
2015-06-17_00.05.10.jpg
2015-06-17_00.05.10.jpg (133.4 KiB) 6922 keer bekeken

Gebruikersavatar
JIMMYS
Berichten: 211
Lid geworden op: 02 jul 2013, 21:32
Locatie: Greece

Re: A small problem

#230 Bericht door JIMMYS » 16 jun 2015, 23:18

And so i hope u like it.your help qnd your foroum was the spark to do this job.
Thank u all of u.
Bijlagen
20150616_200508.jpg
20150616_200508.jpg (176.42 KiB) 6920 keer bekeken
20150616_200526.jpg
20150616_200526.jpg (179.84 KiB) 6920 keer bekeken
20150616_200559.jpg
20150616_200559.jpg (188.79 KiB) 6920 keer bekeken
20150616_200611.jpg
20150616_200611.jpg (191.19 KiB) 6920 keer bekeken
20150616_200637.jpg
20150616_200637.jpg (162.14 KiB) 6920 keer bekeken
20150616_200724.jpg
20150616_200724.jpg (179.65 KiB) 6920 keer bekeken
20150616_200734.jpg
20150616_200734.jpg (180.04 KiB) 6920 keer bekeken
20150616_200753.jpg
20150616_200753.jpg (193.7 KiB) 6920 keer bekeken

Gebruikersavatar
hermanngas
Berichten: 2544
Lid geworden op: 08 jan 2010, 17:08
Locatie: Dronten

Re: A small problem

#231 Bericht door hermanngas » 16 jun 2015, 23:25

:clap

Gebruikersavatar
pascal
Berichten: 2887
Lid geworden op: 06 jan 2007, 17:34
Locatie: Vlak bij Lochem
Contacteer:

Re: A small problem

#232 Bericht door pascal » 16 jun 2015, 23:37

Nice

Gebruikersavatar
JIMMYS
Berichten: 211
Lid geworden op: 02 jul 2013, 21:32
Locatie: Greece

Re: A small problem

#233 Bericht door JIMMYS » 18 jul 2015, 08:26

It works with any bugie i tried.
BP6HS, BP7HS, BR8HS.
Bijlagen
20150715_182616.jpg
20150715_182616.jpg (83.79 KiB) 6773 keer bekeken

Gebruikersavatar
Caspar
Berichten: 8971
Lid geworden op: 10 sep 2002, 14:43
Locatie: Zuid-Oost Limburg

Re: A small problem

#234 Bericht door Caspar » 18 jul 2015, 08:34

The B7HS is my advise.
Good job for a low budget overhaul.

Gebruikersavatar
Henk 3bakvoet
Winnaar Kreidlerverkiezing Lexmond 2005
Berichten: 8926
Lid geworden op: 27 jan 2005, 01:01
Locatie: Koog aan de Zaan

Re: A small problem

#235 Bericht door Henk 3bakvoet » 18 jul 2015, 09:22

low budget
Pardon, de teller staat op 400 miljard :lol:

Most people in Holland have to wait until retirement age (67 years) to be able to build.
Congratulations on this beautiful Kreidler egg tank.

Gebruikersavatar
JIMMYS
Berichten: 211
Lid geworden op: 02 jul 2013, 21:32
Locatie: Greece

Re: A small problem

#236 Bericht door JIMMYS » 18 jul 2015, 22:34

Caspar schreef:The B7HS is my advise.
Good job for a low budget overhaul.
Total amount included the buy is close to 450€.
I shall follow your advice.
Henk 3bakvoet schreef:
low budget
Pardon, de teller staat op 400 miljard :lol:

Most people in Holland have to wait until retirement age (67 years) to be able to build.
Congratulations on this beautiful Kreidler egg tank.
Good joke, but i ll not laugh.
Things here are for sure very very bad. Dont make it worst. :(
What do u mean "to be able to build"? It has to do with money or the time that build demands from u?
because if u want and love something u can find both of them!

Gebruikersavatar
JIMMYS
Berichten: 211
Lid geworden op: 02 jul 2013, 21:32
Locatie: Greece

Re: A small problem

#237 Bericht door JIMMYS » 01 aug 2015, 21:39

Carburator Bing 1/18/13 if i replace the main jet from 72 with 75 it will work good?
maybe more air?
and something else: the only different between 1/18/13 and 1/18/26 is only the main jet! Right?
and i owe to u 400 billions but let me spent 3€ to buy a new main jet and only if u tell me tha it works.
Faithfully, Dimitrios.

Gebruikersavatar
hermanngas
Berichten: 2544
Lid geworden op: 08 jan 2010, 17:08
Locatie: Dronten

Re: A small problem

#238 Bericht door hermanngas » 02 aug 2015, 00:18

1/18/26
Hauptdüse: Gr. 75
Nadeldüse : Gr. 7037
Leerlaufdüse : Gr. 35
Nadelstellung : 2 (2. Düsennadelkerbe von oben)
Luftregulierschraube offen : 1 x

1/18/13
Hauptdüse: Gr. 72
Nadeldüse : Gr. 7037
Leerlaufdüse : Gr. 35
Nadelstellung : 3 (3. Düsennadelkerbe von oben)
Luftregulierschraube offen : 1 x

Gebruikersavatar
Caspar
Berichten: 8971
Lid geworden op: 10 sep 2002, 14:43
Locatie: Zuid-Oost Limburg

Re: A small problem

#239 Bericht door Caspar » 02 aug 2015, 11:48

Usealy 72 works better on your setup.

Gebruikersavatar
RCD
Berichten: 186
Lid geworden op: 25 feb 2010, 15:03

Re: A small problem

#240 Bericht door RCD » 04 sep 2015, 17:18

I recon that youre not the only one who drive a Kreidler for the daily based use. Despite the differences in average landscape and climat to holland, how does the kreidler pays his contribute in the uphill going/forward ability?

Gebruikersavatar
JIMMYS
Berichten: 211
Lid geworden op: 02 jul 2013, 21:32
Locatie: Greece

Re: A small problem

#241 Bericht door JIMMYS » 06 sep 2015, 21:52

for the 1968 TM is this the right piston? or tell me the right piston rings.
http://www.kreidlerparts.com/parts/15.6 ... olerance-I
RCD schreef:I recon that youre not the only one who drive a Kreidler for the daily based use. Despite the differences in average landscape and climat to holland, how does the kreidler pays his contribute in the uphill going/forward ability?
yes it is not for daily use. and unfortunately i haven t try it uphill but at a flyer for Greece it is writen that with one person at 36 degrees and with 2 persons 20. i hope i help u.
Bijlagen
KF 817 165-10.jpg
KF 817 165-10.jpg (83.82 KiB) 6411 keer bekeken

Gebruikersavatar
JIMMYS
Berichten: 211
Lid geworden op: 02 jul 2013, 21:32
Locatie: Greece

Re: A small problem

#242 Bericht door JIMMYS » 09 sep 2015, 12:22

what is the difference to a piston tolerance A to tolerance B to C....

Gebruikersavatar
kursl00
Berichten: 102
Lid geworden op: 03 jul 2011, 19:58
Locatie: Beegden
Contacteer:

Re: A small problem

#243 Bericht door kursl00 » 09 sep 2015, 18:07

For example Mahle Pistons in mm

A39.93
B39.935
C39.94
D39.945
E39.95
F39.955
G39.96
H39.965
I39.97
J39.975
K39.98
L39.985
M39.99
N39.995

Gebruikersavatar
JIMMYS
Berichten: 211
Lid geworden op: 02 jul 2013, 21:32
Locatie: Greece

Re: A small problem

#244 Bericht door JIMMYS » 09 sep 2015, 21:46

kursl00 schreef:For example Mahle Pistons in mm

A39.93
B39.935
C39.94
D39.945
E39.95
F39.955
G39.96
H39.965
I39.97
J39.975
K39.98
L39.985
M39.99
N39.995
thank u. So i dont know the tolerance of the piston i have for the TM, but if i replace it with the piston tolerance K i shall have more verdichtung?

Gebruikersavatar
Enzo-tvdzijden
Expert
Berichten: 47624
Lid geworden op: 27 nov 2002, 21:55
Locatie: Gem. Leidschendam/Voorburg

Re: A small problem

#245 Bericht door Enzo-tvdzijden » 09 sep 2015, 21:54

List is only a match for a brand new original Mahle cilinder and Piston with the same letter

Gebruikersavatar
JIMMYS
Berichten: 211
Lid geworden op: 02 jul 2013, 21:32
Locatie: Greece

Re: A small problem

#246 Bericht door JIMMYS » 10 sep 2015, 08:04

Enzo-tvdzijden schreef:List is only a match for a brand new original Mahle cilinder and Piston with the same letter
I see.

Gebruikersavatar
Caspar
Berichten: 8971
Lid geworden op: 10 sep 2002, 14:43
Locatie: Zuid-Oost Limburg

Re: A small problem

#247 Bericht door Caspar » 10 sep 2015, 13:37

The best way to do it , is to measure your cilinder diameter.
Then order a new piston in the right size.
I think it is a used cilinder ? Then u better NOT use a piston with an L-shape pistonring.

Gebruikersavatar
JIMMYS
Berichten: 211
Lid geworden op: 02 jul 2013, 21:32
Locatie: Greece

Re: A small problem

#248 Bericht door JIMMYS » 13 sep 2015, 13:39

do u have information for this?
i find it here at Greece and the man who selling it, has this picture only.
Bijlagen
Desktop_001.jpg
Desktop_001.jpg (58.94 KiB) 6274 keer bekeken

Gebruikersavatar
Enzo-tvdzijden
Expert
Berichten: 47624
Lid geworden op: 27 nov 2002, 21:55
Locatie: Gem. Leidschendam/Voorburg

Re: A small problem

#249 Bericht door Enzo-tvdzijden » 13 sep 2015, 14:12

Very good Piston when he matched on 0.03-0.05 mm

Enzo

Gebruikersavatar
JIMMYS
Berichten: 211
Lid geworden op: 02 jul 2013, 21:32
Locatie: Greece

Re: A small problem

#250 Bericht door JIMMYS » 14 sep 2015, 11:01

This is only for rs?
it has chrome rings?
Bijlagen
6905546_0_b.jpeg
6905546_0_b.jpeg (98.66 KiB) 6242 keer bekeken

Plaats reactie